Dating your fender strat Naked lebanese girls
They were stamped on the back vibrato cover plate (early '50s Strats), and on the bridge plate between the pickup and the saddles on some Telecasters.
But due to the modular nature of Fender's production methods, and the fact that most serial numbers schemes are not sequential and usually overlap from between 2 to 4 years, (from the early days of Fender, through to the mid 1980s), dating by the serial number is not an exact science.
The neck date simply refers to the date that the neck was produced.
Given the modular nature of Fender's production techniques, a neck may have been produced in one year, placed in a warehouse and remained in stock for a period of time, and then subsequently paired with a body to create a complete guitar in the following year.
instrument production history, production dates have been applied to various components.
Production dates have been penciled or stamped on the butt end of the heel of the neck of most guitars and basses.
This new numbering scheme was short-lived and was replaced only a few months later by an improved scheme that identifies an instrument's country of origin and year of manufacture in the body of the serial number.
California Series electric guitars and basses from 19 use an AMXN prefix and share U.
So, obviously a neck date, while being helpful in providing a date range of production, cannot be a definitive reference.
While there have been periods where dramatic changes have occurred, for example: the transition periods between Leo's Fender and the CBS years, as well as the transition between CBS' Fender and the current ownership, generally speaking, most models are feature specific and do not change from year to year..
The numbers for each year typically overlap, as there is always a transitional period between successive years and as necks that are made and serial numbered late in any given year are used on instruments assembled in the early months of the following year.
A new serial-numbering scheme was adopted toward the end of 2009 using the number 10 as a prefix, followed by a space, followed by seven digits.
Search for dating your fender strat:
Fender began producing instruments in its Ensenada, Mexico, factory in 1990.